The essence of light is one of the most important things in anyone’s life To fascinate a buildings form or design is a prerequisite of any lighting designer, to this end we at Unilamp believe it our profession to assist in this process. Founded in Thailand in 1993 Unilamp has become the leading manufacturer of outdoor lighting and outdoor lighting applications. Our success has been based on a solid foundation of identifying our clients requirements for sustainability, reliability, design and functionality. We now export to over fifty (50) countries. Our history is reflected with taking the necessary steps to ensure our clients are presented with the best possible product and solution every time. The Unilamp brand is synonymous worldwide with quality and every product that leaves our Factory at Prachinburi in Thailand is manufactured to meet all IEC and TIS standards. Our working system is certified by ISO 9001 and ISO 14001. For the lighting designer all facets of exterior lighting are covered within our range. Our Research and design center allows us to offer the latest in technology. This is not limited to lamp sources or control gear but as usual we take this all through into our manufacturing processes. Our product ranges include Spot Light, Flood Light, Power Projector, Down Light, Wall Light, Step Light, Surface Washer, Bollard, Post-top Light, Area Light, In-ground up-light and Under Water Light. Located in Bangkok with our Head Office and showroom in Ramintra road we are here to help and service our market. Our staff are important to our culture and our team now totals 280 people.
The opening of the company. Started with 10M baht (350,000 USD) registered capital. Total staff 40 persons.
Export to ASAIN countries. Introduced the first outdoor products made from PC and ABS housing. Installed an automatic painting machine.
Expanded export to include South America and Australia.
Participated at our first international lighting fair in Taiwan.
Invited to exhibit at Light+Building Frankfurt.
Increased market share in Europe,
Expanded export to include Africa.
Began joint co-operation with Philips Lighting at Eindhoven - Netherlands.
Continued growth in export sales.
Established an ongoing relationship with IMQ laboratory in Italy.
|2006||Installation of Goniophotometer to establish in-house photometric testing facility.|
Relocated to purpose built Head office and showroom.
New advanced engineering software installed.
Established relationship with VDE for approval of all products to German VDE standard.
Introduction of LED luminaires to the market.
ISO 14001 certified.
Pass VDE factory inspection.
Respected worldwide for its focus on quality and design Unilamp luminaires offer the highest grade of manufacture and value on the market. With a never ending desire to improve Unilamp product development is constantly evolving with new designs, finishes and technology being used.
The process of our luminaires manufacture combines design and technology together with a blend of software. The very first step of our work begins with design & development process of our engineers to create high quality fixtures.
Utilising 3 Dimensional CAD software initially in the fixture design and product layout.
The Unilamp R & D team are experts in the use of:
|AutoCad||for drawings and drafting|
|Solid Works||for 3D fixtures design and FEA analysis|
|Unigraphic NX5||for mould design and fabrication|
|Photopia||for design of lighting optics|
|DIALux||to provide high quality lighting calculations and solutions for our clients via web based intergration|
|3Ds MAX||Conceptual rendering for clients|
All Moulds and tools are made to exhaustive Unilamp procedures.
Equipped with computerized CNC milling equipment for a precision moulding assists us to achieve high flexibility in mould manufacturing.
Unilamp full process consists of 16 stages
Nano Ceramic surface conversion process optimizes the corrosion resistant property and increases powder coat adhesion.
The chemical concentration in the process is checked daily to ensure that the parameter of every step is fully maintained.
Primary epoxy-resin based coating increases corrosion resistant property on the surface when exposed to severe climatic conditions. The primer is formulated to be used on casting metal substrates such as aluminium alloys.
UV-stabilized Polyester powder coat from Jotun gives a long-lasting colour rendering and combines protective properties with good weather resistance.
High purity De-Ionized water is used in the process.
The laboratory test result shows that our coated aluminium parts have passed 2,000 hours salt spray resistance test (ASTM B 117) and humidity atmospheric resistance test (DIN 50017).
Our product testing is second to none and our clients can be assured that at Unilamp a thorough process of product testing is adhered to, both at our factory and at any of our partners premises. All luminaires that carry the Unilamp trademark fall under our guidelines for manufacture.
All Unilamp product is measured by the Goniophotometer which gives our clients surety of lighting design and all files are in IES format.
Water Jet Testing for ingress of liquid and moisture by water jet equipment.
Dust test for the ingression of harmful dust and solid particles.
Test under conditions representing cyclic heating and cooling in service, the fixture shall not become unsafe or fail prematurely.
Test for the protection against electric shock, insulation resistance and earth continuity.
Test for electromagnetic compatibility which includes harmonic current emissions, voltage fluctuation and insertion loss.
Test verifying that there is no leakage on the products.
Test for the degree of protection of the lighting fixture against harmful external mechanical impacts.
Test for the degree of corrosion resistance on the fixture’s surface under severe saline environment.
Simulation of strength analysis carried out under strong wind environment.
As a leading manufacturer of lighting solutions for residential and commercial settings, UNILAMP now offers an ecological lighting solution to suit most lighting requirements. From the past to present, our company continues to strive for excellence by continuously developing the Unilamp brand and product quality. To this end we have been rewarded with the Industrial Quality Standard.
Our belief in what we do has seen us contribute in most major international lighting exhibitions as listed.
Light + Building – Frankfurt, Germany
Hong Kong Lighting Fair
Light Middle East – Dubai, UAE
LumiVill – Lyon, France
Intel Show – Milan, Italy
BOI 2000, BOI 2012 Fair
Baan lae Suan Fair
Our consideration in keeping our markets abreast of latest developments allows us to market via most major architectural and lighting magazines around the world.
We have always believed in ourselves and it is our initiative and desire to be the best that has seen us rise from our beginnings of 1993 to satisfy a worldwide market in the future.
We are proud of our heritage but fully understand that we must continue to provide you, our client, with the highest possible customer service balanced with a long lasting product. Our Showroom in Ramintra Rd Bangkok is open to all of our clients to assist in satisfying and developing a professional experience and atmosphere.
Please help us in continuing our journey.